my notes

armv6 missing said Application Loader

2012-01-02T23:46:00.000-08:00

When loading an iOS app built with Xcode4 to iTunes using Application Loader, it balked:"application executable is missing a required architecture. At least one of the following architecture(s) must be present: armv6"In "Architectures" change from just "$(ARCHS_STANDARD_32_BIT)" to "armv6 $(ARCHS_STANDARD_32_BIT)".Then add to info.plist file the following:UIRequiredDeviceCapabilities armv7Make sure in "Supported Platforms" the distribution does not contain "iphonesimulator".Make sure also that "Build Active Architectures Only" is deselected for distribution.

Syncing with rsync

2011-05-16T18:39:00.000-07:00

psyncX that I have been using does not work on Snow Leopard.
Since I am also in search for network storage, then probably just ditch psyncX and go for bare-bone rsync, which is supposedly network-aware compared to pysnc.

Here is the command line:

rsync -aNHAXxvuP --fileflags --forcechange --exclude='.DS_Store' /src /dst

a equals -rlptgoD
N preserve createtimes
H preserve hardlinks
A preserve ACLs
X preserve xattr
x don't cross file system
v verbose
u skip files that are newer on the receiver
P equals --partial --progress, i.e., shows progress, and don't delete partially synced files when command is interrupted (to be resumed later)

when done, do the other way around (flip /src and /dst) to get synced both way.

This set of options makes rsync passed bbouncer test.

In search of reliable backup and sync solution for Mac

2011-05-11T03:07:00.000-07:00

I got several Macs to use, and need to have mostly same set of files on them.
I may not have some or all of them physically on the same location, so copying via LAN is not a solution.

I thought I found the solution: Amazon S3 + ExpanDisk + rsync + sparse image

(Ideally the solution should be Amazon S3 + s3fs + MacFUSE + rsync + sparse image, but latest s3fs requires new version of FUSE, while MacFUSE is in abandoned state, still using older FUSE)

BUT ... loading and accessing the image file over the net was painfully slow and unstable.

Previous versions of iPhone SDK

2010-06-06T13:22:00.000-07:00

iPhone SDK 2.2.1 direct download link
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_for_iphone_os_2.2.1__9m2621a__final/iphone_sdk_for_iphone_os_2.2.19m2621afinal.dmg

iPhone SDK 2.2 direct download link
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_for_iphone_os_2.2__9m2621__final/iphone_sdk_for_iphone_os_2.2_9m2621_final.dmg

iPhone SDK 3.0 (Xcode 3.1.3) Leopard direct download link
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_3.0__final/iphone_sdk_3.0__leopard__9m2736__final.dmg

iPhone SDK 3.0 (Xcode 3.2) Snow Leopard direct download link
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_3.0__final/iphone_sdk_3.0__snow_leopard__final.dmg

iPhone SDK 3.1 with Xcode 3.1.4 Leopard direct download link
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_3.1__final/iphone_sdk_3.1_with_xcode_3.1_final__leopard__9m2809.dmg

iPhone SDK 3.1 with XCode 3.2.1 for Snow Leopard
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_3.1__final/iphone_sdk_3.1_with_xcode_3.2_final__snow_leopard__10a432.dmg

iPhone SDK 3.1.2 with XCode 3.1.4 for Leopard
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_3.1.2__final/iphone_sdk_3.1.2_with_xcode_3.1.4__leopard__9m2809.dmg

iPhone SDK 3.1.2 with XCode 3.2.1 for Snow Leopard
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_3.1.2__final/iphone_sdk_3.1.2_with_xcode_3.2.1__snow_leopard__10m2003.dmg

iPhone SDK 3.1.3 with XCode 3.1.4 for Leopard
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_3.1.3__final/iphone_sdk_3.1.3_with_xcode_3.1.4__leopard__9m2809a.dmg

iPhone SDK 3.1.3 with XCode 3.2.1 for Snow Leopard
http://developer.apple.com/iphone/download.action?path=/iphone/iphone_sdk_3.1.3__final/iphone_sdk_3.1.3_with_xcode_3.2.1__snow_leopard__10m2003a.dmg

Start up with Appcelerator Titanium

2010-06-03T22:26:00.000-07:00

Install Android SDK

Install development environment (Eclipse)

Install Google APIs addon from inside Ecplise
http://code.google.com/intl/ja/android/add-ons/google-apis/installing.html

Download and install Appcelerator Titanium
http://www.appcelerator.com/download

Point Titanium to Android SDK location on disk

Download Kitchen Sink
http://developer.appcelerator.com/doc/kitchensink

Launch.

"Give up establishing PPP/LCP in REQSENT" on Yamaha RTX

2010-06-03T04:37:00.000-07:00

Yamaha RTX is set up to receive PPTP connection, but client could not connect, like below:

2010/06/02 19:18:20: TUNNEL[14] PPTP connection is established: 220.100.223.36
2010/06/02 19:18:20: PP[ANONYMOUS01] PPTP Connect
2010/06/02 19:18:21: PP[ANONYMOUS01] SEND LCP ConfReq in STARTING
2010/06/02 19:18:21: ff 03 c0 21 01 01 00 13 01 04 07 00 03 05 c2 23
2010/06/02 19:18:21: 80 05 06 00 40 18 58
010/06/02 19:18:24: PP[ANONYMOUS01] SEND LCP ConfReq in REQSENT
2010/06/02 19:18:24: ff 03 c0 21 01 01 00 13 01 04 07 00 03 05 c2 23
2010/06/02 19:18:24: 80 05 06 00 40 18 58
2010/06/02 19:18:27: PP[ANONYMOUS01] SEND LCP ConfReq in REQSENT
2010/06/02 19:18:27: ff 03 c0 21 01 01 00 13 01 04 07 00 03 05 c2 23
2010/06/02 19:18:27: 80 05 06 00 40 18 58
...

2010/06/02 19:18:51: PP[ANONYMOUS01] Give up establishing PPP/LCP in REQSENT
2010/06/02 19:18:51: PP[ANONYMOUS01] PPTP Disconnecting, cause [PPP: LCP Timeou
t]
2010/06/02 19:18:51: TUNNEL[14] PPTP connection is closed: xxx.xxx.xxx.xxx

Adding "pppoe auto connect on" to "pp select anonymous" part solved this issue.

Some references
PPTP commands
http://www.rtpro.yamaha.co.jp/RT/docs/pptp/pptp-command.html
Setting samples
http://www.rtpro.yamaha.co.jp/RT/docs/example/pptp/pptp_example1.html
http://tomo.no-ip.com/goodstream/vpn/pptp/rtx1000/rtx1000.html

iPhone manual backup

2010-05-29T17:18:00.000-07:00

iPhone manual backup
http://www.funkyspacemonkey.com/howto-manually-backup-iphone

Blackberry cannot be activated

2010-04-20T14:22:00.000-07:00

http://forum.gsmhosting.com/vbb/f489/pin-suspended-bis-cannot-activate-638751/index5.html
here is the step by step guide -
download BB Desktop Manager version 4.7 or higher and back ur fone..
you download the MFI Mul*t*iloader (search it on google)
Downoload and install on your hard drive. (follow the onscreen instruction)
Download radi*o*lab toold (again, search it on google)
DISCONNECT FROM INTERNET - PLEASE PLEASE
once you have done both connect phone to ur laptop and thn open MFI Multil*o*ad. Let it detect the fone and do whatever it wants to. after few seconds you shall see the results in same window, could be - ABORT (Yellow colour fonts), FAIL (Red), PASS (Green)
regardless of what it is, go to radio lab. Connect by clicking on top left clickable button.
Than Click on ID from left coulmn and than Read the PIN and/or IMEI. Change it to what you like. Than press, WRITE (next to Read)
All this while, leave your fone connected (dont worry if you dont see anything on ur screen)
than close everything and go to BB Desktop Manager and flash the fone... by clicking on Application Loader. follow the on screen prompts (you needed to be connected to internet)

MFI multiloader
http://forum.gsmhosting.com/vbb/f489/download-guide-mfi-multiloader-blackberry-unlock-653921/

JConnector and Facebook connect - Session key invalid or no longer valid

2010-03-10T16:31:00.000-08:00

Fatal error: Uncaught exception 'FacebookRestClientException' with message 'Session key invalid or no longer valid' in .../modules/mod_jconnector/facebook/php/facebookapi_php5_restlib.php:3017 Stack trace: #0 .../modules/mod_jconnector/facebook/php/facebookapi_php5_restlib.php(1614): FacebookRestClient->call_method('facebook.users....', Array) #1 .../modules/mod_jconnector/jconnector_server.php(56): FacebookRestClient->users_getInfo('my facebook id', Array) #2 {main} thrown in .../modules/mod_jconnector/facebook/php/facebookapi_php5_restlib.php on line 3017

To fix this issue go to the file modules/mod_jconnector/jconnector_server.php there is a line at round about line 50:
$facebook = new Facebook($module_params['fb_key'], $module_params['fb_secret']);

Just after the above line add this line to fix the issue:
$facebook->api_client->session_key = null;

Now it should look something like this:
Code: [Select]
include_once(JPATH_BASE .DS.'modules'.DS.'mod_jconnector'.DS.'facebook'.DS.'php'.DS.'facebook.php');
$facebook = new Facebook($module_params['fb_key'], $module_params['fb_secret']);
$facebook->api_client->session_key = null;
$fb_uid = $facebook->require_login();

Reference
http://www.phpin24.co.za/php/jconnector-and-facebook-connect-session-key-invalid-or-no-longer-valid/

Equallogic setup

2010-02-02T15:45:00.000-08:00

Got Equallogic, lots of manuals, yeah, but where to start?

So you bought an EqualLogic SAN, now what
http://michaelellerbeck.com/2009/11/23/so-you-bought-an-equallogic-san-now-what-part-one/

How to shutdown EqualLogic

2010-01-13T07:11:00.000-08:00

1. Use telent, SSH connecting to the SAN IP (no group IP) or null modem cable connecting to the SAN serial port.
2. login using grpadmin account.
3. run shutdown command.

Here are example.

PS Series Storage Arrays
Unauthorized Access Prohibited

login: grpadmin
Password:

Welcome to Group Manager

Copyright 2001-2008 EqualLogic, Inc.

SANGP> shutdown
Do you really want to shutdown the system? (yes/no) [no]yes
Halt at Tue Jun 9 18:37:04 CDT 2009 -- please wait...
5823:0:logevent: 9-Jun-2009 18:37:04.280835:logevent.c:242:WARNING:25.3.0:User has initiated restart with '(halt)'.

The array has been halted.
You can safely power off the array or type any key to restart the array.

Reference:

http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6271

Connect two Yamaha RTX via VPN with dynamic global IP

2009-12-10T05:41:00.000-08:00

Connect two Yamaha RTX via VPN with dynamic global IP (of course, one side must have a fixed global IP)
http://www.rtpro.yamaha.co.jp/RT/docs/ipsec/dialup_vpn.html

PPTP VPN on Yamaha RTX

2009-12-10T03:51:00.001-08:00

This is to set Yamaha RTX as PPTP server waiting for connection from clients.

# pp select anonymous
anonymous# pp bind tunnel2
anonymous# pp auth request mschap
anonymous# pp auth username
anonymous# ppp ipcp ipaddress on
anonymous# ppp ipcp msext on
anonymous# ppp ccp type mppe-any
anonymous# ip pp mtu 1280
anonymous# pptp service type server
anonymous# pp enable anonymous
anonymous# pptp service on
anonymous# tunnel select 2
tunnel2# tunnel encapsulation pptp
tunnel2# tunnel enable 2
tunnel2# save
セーブ中... CONFIG0 終了

Reference
http://www.rtpro.yamaha.co.jp/RT/docs/example/pptp/pptp_example1.html

Filtering packet at tunnel on Yamaha RTX

2009-12-03T17:52:00.000-08:00

Filter setting from Web UI is only possible for PP, but via command line filtering tunnel is also possible, for example:

ip filter 201010 pass * 172.31.31.0/24 icmp * *
ip filter 201011 pass * 172.31.31.0/24 established * *
ip filter 201012 pass * 172.31.31.0/24 tcp * ident
ip filter 201013 pass * 172.31.31.86/32 * * *
ip filter 201014 pass 10.0.10.254/32 172.31.31.0/24 * * *
ip filter 201015 pass 172.31.31.0/24 * * * *

tunnel select 2
tunnel encapsulation ipip
tunnel endpoint address 172.25.111.3
ip tunnel tcp mss limit auto
ip tunnel secure filter in 201010 201011 201012 201013 201014 201015
tunnel enable 2

This is, use "ip tunnel secure" instead of "ip pp secure" and put this line after "tunnel select".

Hackintosh on LG X120

2009-11-29T05:13:00.000-08:00

Download NetbookBootMaker
http://code.google.com/p/netbook-installer/

Create the installer USB disk from Leopard DVD as mentioned here
http://www.mydellmini.com/forum/mac-os-x-guides/12595-netbookinstaller-1-usb-installation-via-mac.html#post99604

With the USB boot disk, boot and create 2 partitions as mentioned on this "Example 2: GUID Multi-Boot for Windows XP"
http://osx.mechdrew.com/guides/advanced2.shtml

Then proceed with install.

The X120 will be installed with Leopard and working Ethernet. Do a software update, which will update it to 10.5.8, then reboot. Screen will just be blank. Do a safe boot by typing -x on Chamaleon screen. Then run Netbook installer, install all. Leopard will then boot normally. But ethernet will no longer work.

LG X120's WiFi is using Realtek's rtl8187se. This is the same card as MSI Wind, and there is already a driver for MacOS. Install the driver to enable WiFi.
http://financemanila.net/2008/12/download-rtl8187se-driver-and-install-mac-osx-in-your-msi-wind-akoya-advent/
http://www.tierheilpraxis-meder.de/Realtek_RTL8187SE_MacOS10.5_Driver_073_UI_1.6.2.zip
http://rapidshare.com/files/171809218/Realtek_RTL8187SE_MacOS10.5_Driver_073_UI_1.6.2.zip
http://rapidshare.com/files/171826470/Realtek_RTL8187SE_MacOS10.5_Driver.zip

Use this to enable ethernet again
http://sourceforge.net/projects/realtekr1000/

FG with Yamaha RTX

2009-10-29T06:37:00.000-07:00

For 端末型払い出し just routing the traffic cannot connect two networks, so tunnel must be made to connect two networks via router.

There are 3 types of tunnel supported by Yamaha RTX:

-IPIP

-PPTP

-IPSec

There is no way to properly set Yamaha RTX via web for unnumbered PPPoE when multisession is set via the web. The easiest way is to first set PPPoE multisession, and then add the following settings via command line (assuming the unnumbered PPPoE is at pp1):

pp select 1
no ppp ipcp ipaddress on
nat descriptor address outer 1000 [router's IP address]
nat descriptor address inner 1000 [first private LAN IP address]-[last private LAN IP address] [router's IP address]

Or, when using wan side IP other than router's IP:

pp select 1
no ppp ipcp ipaddress on
nat descriptor address outer 1000 [router's IP address]
nat descriptor address inner 1000 [first private LAN IP address]-[last private LAN IP address]

Reference:

IPIP sample

http://wasurenaitameni.seesaa.net/article/2288214.html

Unnumbered

http://ameblo.jp/kiri-hitoha/entry-10289261719.html

Virtual infrastructure manager

2009-10-25T03:47:00.000-07:00

Lists/comparisons
http://www.mcs.anl.gov/uploads/cels/papers/P1649.pdf
http://www.qsos.org/?p=129
http://ajmf.wordpress.com/2009/06/08/management-interfaces-for-the-kernel-virtual-machine-kvm/
https://dspace.ucalgary.ca/bitstream/1880/47206/1/2009-928-07.pdf

Commercial (including public could):
Amazon (AWS)
VMWare's Virtual Center http://www.vmware.com/products/vi/vc/
Platform Computing's Virtual Machine Orchestrator http://www.platform.com/products/platform-vm-orchestrator/
3Tera's AppLogic http://www.3tera.com/applogic/

Free
Eucalyptus http://www.eucalyptus.com/
Convirt http://www.convirture.com/
Abiquo http://www.abiquo.com/en/products/abicloud
OpenNebula http://www.opennebula.org/
Nimbus http://workspace.globus.org/
oVirt http://ovirt.org/ *KVM only
virt-manager http://virt-manager.et.redhat.com/
openQRM http://www.openqrm.com/
Enomaly http://www.enomaly.com/
Proxmox VE http://www.proxmox.com/cms_proxmox/en/virtualization/proxmox-ve/proxmox-ve-startseite.html

CPU benchmark

2009-10-22T19:38:00.000-07:00

Over 50,000 CPUs benchmarked
http://www.cpubenchmark.net/cpu_list.php

Dell PowerEdge servers comparison
http://www.dell.com/us/en/enterprise/servers/rack_optimized/cp.aspx?refid=rack_optimized&cs=555&s=biz

CPU mark Rank
Intel Xeon E5502 @ 1.87GHz 1602 178
Intel Xeon X5570 @ 2.93GHz 4491 27
Dual Core AMD Opteron 290 1785 149
(from http://www.cpubenchmark.net/cpu_list.php)

Colocation with 1Gbps to IIX/OIXP

2009-10-22T16:31:00.000-07:00

Promo Paket Colocation IIX 2009
http://indonesiadot.com/drupal/promo-paket-colocation-iix-2009
DataCenter : Gedung Cyber Lantai 5
Bandwidth : up to 1000 Mbps
Backup UPS : Yes
Earth Ground : Yes
AC : Yes
NOC 24x7 : Yes
Rp. 1.100.000,- Per bulan

but

Q: bandwidth ke IIX bisa dapat 1Gbps ya?
A: saat ini masih 100mbps
Q: oh, di url itu ditulis 1000mbps
kenapa?
A: sedang di plan untuk upgrade
menunggu keputusan dari pihak datacenter nya

Paket Colocation Standard
http://iixmedia.com/server-colocation.html
Harga Rp. 450.000,-
Free Setup Fee selama promotion
GET OIXP Connection 1 Gb/s (connect to Gigabit Switch) Promotion ONLY
Listrik 400 Watt
GRATIS AKUN di paneldotid.com selama 3 bulan

Peering ke OpenIXP 1 Gbps
http://on.magnet-id.com/2009/07/24/peering-ke-openixp-1-gbps/
Apabila anda membutuhkan kapasitas peering up to 1 Gbps silahkan hubungi Magnet Hosting melalui e-mail info(at)magnet-id.com, hal tersebut dapat dilakukan dengan biaya tertentu, dan tentunya server anda harus memiliki Interface 1 Gbps.

ANGIN.com Hosting
http://angin.com/e.php?subaction=showfull&id=1224452004&archive=&start_from=&ucat=13&
Fasilitas:
Local Link : open IIX 1 Gbps melalui switch
International link : shared, Dedicated b/w based on request
1 IP Adress
Ruang server dilengkapi fire control system & climate control
Akses Gedung & monitoring 24 jam
Listrik : PLN, back up UPS & generator gedung, redundant
Security system 24 jam

Optimizing Windows Media Services

2009-05-13T22:55:00.001-07:00

This article provides a technical overview of the performance and scalability of Microsoft Windows Media Services 9 Series (including the Windows Media Services update released with Windows Server 2003 Service Pack 1.) It describes common Windows Media Services performance issues, limitations, and performance monitoring techniques. It also presents the results from a set of performance tests conducted in a controlled lab environment.

It is recommended that you use the information presented in this document as a guideline. The performance results are based on specific hardware configurations that represent simplified versions of real-world scenarios. The actual capacity of your streaming media system depends on several factors, including network topology, user utilization patterns, hardware configuration, and software configuration. Based on the guidelines and performance information in this article, you should be able to design, fine-tune, and maximize the capacity of your servers to achieve the best results for your individual situation.

http://www.microsoft.com/windows/windowsmedia/howto/articles/optimize_web.aspx

Handset value chain

2009-05-13T22:44:00.001-07:00

Mobile Handset Value Chain http://www.slideshare.net/pacificleo/mobile-handset-value-chain

産業用PC with PCI and SATA

2009-05-13T22:15:00.000-07:00

Advantech ARK-3420
http://www.advantech.co.jp/products/ARK-3420/mod_1-2ZM313.aspx
Intel® Core™ 2 Duoプロセッサ搭載（最大1.6 GHz）
I/Oも充実！シリアルポートx4 ,GbEx2, eSATA, USB 2.0x6 で各種機器との接続が容易
2.5インチシリアルATA HDDドライブベイ x 2

Contec IPC-BX900P2-AC500
http://www.contec.co.jp/product/computer/boxpc900/index.html?ref=new
￥298,200（本体価格￥284,000）
Low Voltage Intel® CoreTM Duo Processor L2400（1.66GHz），FSB667MHz
Intel(R) 945GME + ICH7M-DH
メモリ 1GB （PC2-4300 DDR2 SDRAM）［200ピンSO-DIMMソケット］
Serial ATA I/F 3.5 インチSATA ハードディスクスロットイン方式×1（シリアルATA 1.0 準拠）
CFカードスロット CF CARD Type I×2CF カードスロット、ブート可能
拡張ボードスロット PCI Express(x1)スロット×1、PCIスロット×1、使用可能ボード長： 240mm (Max.)
質量約3.9kg （記憶装置未搭載の場合）

FBC-M200
http://www.power-assist.co.jp/products/fbcm200.html
CeleronM 1.3GHz RAM 1GBまで

A903 Series
http://www.apd.jp/apa903/
Intel Core 2 Duo T7200(2.0GHz) Processors
1＊SO DIMM DDR II(最大2GB)
PCI*2, PCMCIAスロット*２
2.5インチ(HDD or SSD or DOM)*1